Maybe you have the most beautiful sink in your kitchen. But think about that situation where your kitchen faucet is not working properly.
It is an embarrassing situation for you. Maybe the faucet needs to be replaced with the new one. It’s become common that kitchen faucet is leaking or have other problems cannot be repaired.
To get you better days as before, replacing the faucet becomes an obvious option for you. Sometimes people want to replace their kitchen faucet because they want a lucrative design for the faucet or trying to update with the latest technology.
Replacing a faucet is not a hard task, but need to follow some instruction. To learn how to replace kitchen faucet follows this set of instructions.
The 6 Steps Guide for How to Replace Kitchen Faucet
There are some tasks you need to complete before you start to replace the faucet and these are.
All the necessary steps are given below which help you a lot to make the replacement process easy and perfectly.
Before you start the job read all the instruction carefully then you will get the idea about what you need and what you need to do. Clear all the things out under the sink.
For that, you may need a bowl of good-sized. You all also need to catch excess water. Because after disconnect the supply line, the rest of the water in the pipe will come out.
There are few shut –off valves. In this step, all these valves need to turn off. Because of it, all the water will be off.
It is important to do it before you replace the faucet. Take a work light under the sink to make the job easier.
Now unhinge the nuts using the basin wrench which placed underneath the existing faucet.
Do this part carefully and make some patient otherwise the sink going to scratch easily. After removing the old faucet take the new one and install it according to the instruction.
There are a few nuts of the faucet part. Take a basin wrench to tighten them. Most of the people over tighten it. But don’t do it.
Otherwise, there will be a problem down the line. So, I suggest making it secure, but not super tight.
After placing the faucet make sure that all the pieces are connected. Before you activate the connection through the shut-off valves, take a rag and wipe down all the tubes.
Now, turn on the shut-off valves and let it run for a few minutes. It will flush out any kind of sediment. This type of sediment built up in the pipes.
So it must be wiped out. To replace the aerator turn off the water.
Now it’s time to run the faucet and check out any kind of leaks or drops are trying to develop. The best way to find it out is by using a tissue.
Run a tissue all over the under basin pipes will clear the thing that there any problem in connection or not. If any kind of leaks found, then check the connection again that is connected with the shut-off valves.
Most of the time tightening the connection will solve the problem. But one thing keeps it in mind make the connection little tighter not too tight.
Replacing a kitchen faucet is not a hard or a crazy job like it sounds. If anyone has the basic knowledge about it this process, then it is going to be fun for them.
But you need to come forward with the right tools and the right plan. Follow the guideline and collect all the necessary tools in advance is the last word to replace a kitchen faucet easily.
If you are doing it for the first time, then this article is going to help a lot with the specific steps. So, take the tools and avoid any plumbing bloopers with this instruction.